CARPRO Essence+ PLUS - Gloss & Topcoat

Description

Non-abrasive gloss and topcoat

CARPRO Essence+ PLUS is a unique SiO2 nanocoating. Specially developed to protect uncoated paint surfaces and restore existing ceramic coatings. The product contains no abrasives. Existing coatings can develop slight scratches and swirls over time. Essence+ PLUS offers the ability to repair these slight imperfections without any problems. On top of that, Essence+ PLUS maximizes gloss and hydrophobic performance. The surface becomes as smooth as glass and provides up to one year of excellent protection.

Features glossing agent and topcoat CARPRO Essence+ PLUS

• Top coat with non-abrasive processing
• Repairs existing nano and ceramic coatings
• Adds a layer of SiO2 Quartz protection with lifespan up to 1 year
• Hydrophobic properties: water and dirt repellent
• Gives a tremendous shine
• Processing by hand, dual-action polisher or rotary
• Provides a durable protective coating to untreated paint, PPF, chrome and glass

Instructions for use by hand

1. First, wash the vehicle thoroughly with a car shampoo such as CARPRO Reset
2. Remove contaminants with CARPRO IronX, TarX and/or Spotless
3. Dry the vehicle
4. Degrease the entire surface with CARPRO Eraser
5. Use a small amount of product on an applicator pad
6. Treat a section of about 60x60cm in overlapping polishing motions (circular) without applying much pressure
7. Then let the product dry for a while until a light "haze" forms
8. Then wipe off the residue with a microfiber cloth
9. Repeat these steps until the entire surface is treated

Operating instructions with polisher

1. First, wash the vehicle thoroughly with a car shampoo such as CARPRO Reset
2. Then remove contaminants with CARPRO IronX, TarX and/or Spotless
3. Then dry the vehicle
4. Afterwards, degrease the entire surface with CARPRO Eraser
5. Shake Essence+ well before use
6. Then apply the product to a CARPRO Gloss Pad
7. Then spread the product over the area to be treated (approximately 60x60cm) at low speed
8. Polish the surface at medium speed (3) without applying too much pressure on the machine
9. Then wipe off the residue with a microfiber cloth (unlike manual processing, you don't have to wait for 'haze' to form here)
10. Then clean the pad and reapply a few drops of product to the polishing pad
11. Repeat these steps until the entire surface is treated

Attention: after use, close bottle tightly and do not put in the sun. Preferably always test in an inconspicuous place. Do not use Essence+ PLUS as a primer for a coating, use the normal CARPRO Essence version for that.