Description
Liquid Elements T3200 V3 polisher
The Liquid Elements T3200 V3 eccentric polisher has a 10 mm polishing stroke, standard mounted 125 mm back plate and 750 watts of power. Due to constant speed control with remote control electronics, the freely rotating back plate does not stop, even with slight tilting on round surfaces.
Whether you are a complete beginner in vehicle detailing or a professional detailer, this machine is suitable for any user!
Eccentric polisher car
With its modern design, pleasant feel and robust and smooth-running electronics, the T3200 stands out. The two LEDs on the top of the polisher indicate the correct pressure range during the polishing process. When the green LED light is on, the pressure is sufficient; when the red LED light is on, the surface pressure should be reduced.
Dual action polisher 125mm and 75mm
This dual action polisher comes standard with a pre-assembled 125mm backing plate. This can optionally be replaced with a 75mm backing plate. By converting the machine to a 75mm (3 inch) backing plate, you can also use the polisher with smaller polishing pads (75mm/3″).
Features Liquid Elements polisher T3200 125mm
- Eccentric polisher
- Motor with up to 750 watts of power
- Equipped with 125mm support disc
- 10mm orbital clearance
- Constant speed control with remote control electronics
- Low vibration, very smooth in use
- Torque control indicator with green and red LED
- Ergonomic design
- Soft rubber grip
- Lightweight
- Detachable 8-meter power cable
- Optional use with a 75mm support plate
Package contents Liquid Elements dual action polisher
- Polisher T3200 V3
- 125 mm back plate (pre-assembled)
- Storage bag
- Replacement carbon brushes
- Allen wrench
- User Guide
Technical specifications T3200 V4 Liquid Elements dual action polisher
- Voltage: 230V
- Frequency: 50 Hz
- Power consumption: 750 watts
- Speed: 2500-5500 rpm (adjustable)
- Orbital stroke: 10 mm
- Support disc diameter: 125 mm
- Threaded support pad (spindle size): 5/16″ -24
- Weight: 2.4 kg
- Lpa (sound pressure level): 84 dB (A)
- Lwa (sound power level): 95 dB (A)
- Cable length: 8 meters (detachable)
- WEEE Reg. No. DE 64199561
Carbon brushes
The pre-installed carbon brushes (1 pair) in the machine have an average life of about 350 hours with actual use. This is equivalent to detailing approximately 50 vehicles. Proper handling and use of the machine during the polishing process are required for the carbon brushes to last a long time, otherwise their life can vary greatly.
Note: The machine comes standard with replacement carbon brushes, so 2 pairs of carbon brushes are included in the delivery.
There are no reviews yet.