Description
Protect your wrap film with CARPRO CQuartz Skin
CARPRO CQuartz Skin is a wrap coating for matte and glossy wrap films. The glass coating is also perfect for stone chip films (PPF) such as XPEL and SunTek. It provides excellent protection against UV radiation, chemicals, salt and other contaminants. CQuartz Skin also provides extremely hydrophobic results, water and dirt repellent, which greatly facilitate film maintenance. This results in a longer life of the film. The ceramic coating is user-friendly in application and can be applied in most climates without problems.
How can I apply CARPRO CQuartz Skin vinyl wrap coating myself?
- Ensure proper preparation by first cleaning and decontaminating the surface with CARPRO Iron X, TarX and, if necessary, a clay agent
- Then degrease the entire surface with CARPRO Eraser
- Then apply 2 lines of product along the length of the included suede applicator
- Apply CQuartz Skin evenly over the surface in horizontal and vertical strokes, over a section of approximately 60x60cm. Work in overlapping strokes
- Let the product sit for 2~3 minutes and then wipe off with a microfiber cloth. Finally, wipe again with a new, clean cloth
- For best performance, it is best to apply 2 coats. The second coat can be applied after 4 hours or immediately if the first coat is cured with an IR lamp
CARPRO CQuartz Skin coating contents.
- 1 x CQuartz Skin 50ml wrap coating
- 5 x microfiber suede applicator (10x10cm)
- 1 x foam block applicator
- 2 x CQuartz hologram sticker
CARPRO Skin wrap coating features.
- Coating for matte, glossy and PPF wrap films
- Hydrophobic: water and dirt repellent
- UV protection
- Expected lifespan up to 2 years
- Average thickness: 1~2 microns per layer
- ±15ml consumption per layer
- Water contact angle: >110°
- Recommended ambient temperature: 5-35°C
During treatment, always wear a mouth mask and nitrile gloves. Always read the documentation provided beforehand!
Rob (verified owner) -
Top stuff!!!
Easy to apply and the result is great.
Does not streak while polishing with a soft cloth.
The Xpel is now super smooth and dirt and flies slide right off.
With half a bottle I could do the whole car well (BMW X3).
How long it stays on remains to be seen but so far the result is very good.